AC Mains Controller for use with Reed Sensors
This controller switches mains power and is designed for cabinet lighting controlled by reed sensors. The reed sensor can be any of the following LD1400, LD1401 or LD1404.
The controller is a four input, dual output, 500W device. It can be used as a single controller or as two separate controllers within the same unit.
There are two configurations available.
- Configured as a single channel device using up to four inputs to control a single mains power output.
- Configured as a two channel device where two inputs control one mains power output and the other two inputs control a second mains power output.
- As an option, adjustable timer settings allow the device to switch off automatically after a preset period. Automatic switch-off is ideal for installations where lights remain on when doors are left open. For example, if the timer is set for 15 minutes the lights will automatically turn off after 15 minutes. The system is reset when all doors are closed.
- There are four DIP switches. The three RHS DIP switches are used for timing. The LHS DIP switch is used to select one or two channel configuration.
|Channels||1 or 2 (selectable)|
|Maximum Load (total)||500W|
|Sensor Pins||0V, 5V, Input|
|Timer settings (8)||10, 30, 60 sec.5, 15, 30, 60 min, infinity|
Electrical SafetyAS/NZS 61558; AS/NZS 3820:2009
FlammabilityABS AF312C-NP 94VO