| |
|
Credenza
Parts
2 x 20W chrome downlights (2 x LD1501)
2 x Plain Door Kits (2 x LD1400)
1 x 60W electronic controller (1 x LC301)
1 x transformer (1 x LD1600)
|
|
|
Under stair storage
Parts
2 x 50W ceiling downlights (2 x LD1510)
2 x Flanged Door Kits (2 x LD1401)
1 x 100W relay controller (1 x LC201)
1 x transformer (1 x LD1600)
|
| |
|
Wardrobe
Parts
2 x 20W s/s downlights (2 x LD1502)
2 x Plain Door Kits (2 x LD1400)
1 x 60W electronic controller (1 x LC301)
1 x transformer (1 x LD1600)
|
|
 |
Linen closet
Parts
1 x 50W ceiling downlight (1 x LD1510)
1 x Flanged Door Kits (1 x LD1401)
1 x 60W electronic controller (1 x LC301)
1 x transformer (1 x LD1600)
|
| |
|
CD drawer
Parts
2 x 20W black downlights (2 x LD1503)
1 x Plain Door Kit (1 x LD1400)
1 x 60W electronic controller (1 x LC301)
1 x transformer (1 x LD1600)
|
|
 |
Wardrobe
Parts
1 x 50W ceiling downlight (1 x LD1510)
2 x Plain Door Kits (2 x LD1400)
1 x 60W electronic controller (1 x LC301)
1 x transformer (1 x LD1600)
|
| |
|
<
Wardrobe (partial view) >
Parts
4 x 20W chrome downlights (4 x LD1501)
4 x Plain Door Kits (4 x LD1400)
1 x 100W relay controller (1 x LC201)
1 x transformer (1 x LD1600) |
|
|
| |
Lightdream's Concealed Door Switch.
Cross sectional drawing showing positions of
downlight and magnetic
sensor in top of carcass and magnet in door.
Sensors and wiring are placed
in a routered trench and taped over. The magnet
is placed in a 10mm clearance
hole drilled into the top of the door adjacent to
the sensor and the door is edged off as
normal. All leads from lights and sensors are run
back to the controller and plugged in.
Cross section showing a cabinet with sliding
doors.
|
